Recipients of Innovative Student Projects Award

Recipients of Previous Years Innovative Student Projects Award

2020

Doctoral Level

  1. Stefie J Stephen, IIT Madras (Incorporation of time-dependent fracture behaviour in the structural design of fibre reinforced concrete elements)
  2. Asha Das, Cochin University of Science and Technology, Kerala (Automated Nuclear Pleomorphism Scoring in Histopathological Breast Cancer Images)
  3. Kuppuraj Rajamanickam, Indian Institute of Science Bangalore (Studies on Flow Dynamics and spray swirl Interactions in Gas Turbine Combustor)
  4. Akshay Modi, IIT Bombay (Tailored Polymer Nanocomposite Hollow Fiber Membranes for Biomedical, Gas Separation and Water Treatment Applications)
  5. Priyank Mukeshkumar Shah, IIT Delhi (Adaptive Control Strategies for Resilient Operation of Grid Interfaced Solar Energy Conversion System Enabling Power Quality Improvement)
  6. Sayan Dey, IIT Kharagpur (NiO Based Sensors for VOC and Heavy Metal ION Detection)
  7. Chandan Bose, IIT Madras (Dynamical Analysis of unsteady flow phenomena around Flapping wings)
  8. Jhansi Jadav, University of Hyderabad, School of Engineering Sciences & Technology, Hyderabad (Assessment of Precipitation, deformation and fracture behaviour of Superni 263 Ni base Superalloy under Tensile and Low cycle fatigue conditions)
  9. Debanjan Das, Indian Institute of Science Bangalore  (New avenues to transition metal-based water splitting electrocatalysts)
  10. Souvik Ghosh, Indian Institute of Science Bangalore (Optical and opto-thermal route towards dynamic nanomanipulation in fluids)

Master’s Level

  1. Sarosh Alam Ghausi, IIT Bombay (Sensitivity of Precipitation and Streamflow Extremes to Temperature over Central and South Asia) jointly with Mr. Suman Banerjee, IIT Madras (Incorporating Domain Knowledge In Multilingual, Goal-Oriented Neural Dialog Models)
  2. Adarsh Somayaji, IIT Madras (Design & Analysis of a Variable Stiffness Adaptive Jaw for Robust Grasping) jointly with Ms. Krishna Manoj, IIT Madras (Emergence of Rich Dynamical Behaviour in Networks of Coupled Candle-Flame Oscillators: Synchronization, Amplitude Death, and Chimeras)
  3. Smruti Thakur, Institute of Chemical Technology, Mumbai (Ultrasound assisted catalytic transfer hydrogenation of corn oil using Pd/C catalyst by formaldehyde reduction method) jointly with Mr. Pravin Kumar, Indian Institute of Space Science and Technology, Thiruvananthapuram (Effect of Process Parameters on the Microstructures, Defects and Mechanical properties in 3D-Printed (SLM/PBF) Inconel 718 alloy)
  4. Malepati Venkata Sai Krishna, National Institute of Technology, Calicut (Development of Active Switched Impedance Network Based NON- Isolated DC-DC Converters) jointly with Mr. Vinay Chandrasekhar K, International Institute of Information Technology, Bangalore (Design, fabrication and analysis of a portable anthropomimetic upperlimb rehabilitation and exoskeleton system)
  5. Anukiruthika T, Indian Institute of Food Processing Technology (IIFPT), Thanjavur (Design and Fabrication of Customized Foods Using 3D Printing)

Bachelor Level

  1. Rishav Dutta, Indian Institute of Engineering Science and Technology (IIEST), Shibpur (Prediction of Stochastic Non-Stationary Downbursts and Hurricane Wind Field)
  2. Gayathri Girish, Indian Institute of Space Science and Technology, Thiruvananthapuram (Utilizing Energy Function and Variational Inference Training for Designing a Novel Graph Neural Network Architecture)
  3. Rayudu Rahul, National Institute of Technology, Raipur (Internal Linear Mechanism Device for Vertical Transport Distraction Osteogenesis of Maxillo Reconstruction) jointly with Mr. Aakash, IIT Tirupati (An Analytic study of the wiedemann-Franz Law and the thermoelectric figure of merit)
  4. Alok Kumar Pandey, IIT Hyderabad  (Pencil Lead based Graphite-Silica Composite Anodes for Practical Lithium-ion Batteries)
  5. A Sai Darahas, Mr. R. Raghavendra, Ms. K. Vineetha and Mr. Y. Nanda Kishore, National Institute of Technology (NIT), Andhra Pradesh (3D Multispectral Brain Tumor Segmentation Using Deep Neural Networks)
  6. British Sontakke, Indian Institute of Space Science and Technology, Thiruvananthapuram (Magnetic Transduction Schemes and Electronics for Angular Position Sensing of Through-Shafts over Full Circle Range)
  7. Allam Varshith Reddy, Indian Institute of Space Science and Technology, Thiruvananthapuram (Iterative Patched Conic Technique for Lunar Transfer Trajectories)
  8. Arvind Pujari, IIT Madras (Al-based Plasmonic Nanoparticles as an Alternative to Noble Metal Plasmonics)
  9. Siri Gadipudi, Indian Institute of Space Science and Technology, Thiruvananthapuram (Grid Connected Open-end Winding Induction Generator System with Series Reactive Power Compensation for Wind Energy Systems)
  10. Amogh B S, Birla Institute of Technology and Science, Pilani (Black Phosphorous based sensors for healthcare applications) jointly with Mr. Khushank Singhal and Mr. Sumakesh Mishra, IIT Delhi (Development of Fast and Efficient Air Purification System)

2019

Doctoral Level

  1. Dr. Abir De, IIT Kharagpur (Modeling and Learning Influence in Social Networks)
  2. Dr. Gaurav Goswami, IIIT Delhi (Unraveling Representations for Face Recognition from Handcrafted to Deep Learning)
  3. Dr. Subham Swaroop Sahoo, IIT Delhi (Coordinated Control of DC Microgrids)
  4. Dr. Shambhu Sau, IIT Bombay (Modular Converter Topologies with Reduced Transformer Rating and Capacitor Size for High-Power Regenerative Drives)
  5. Dr. Surender Singh, IIT Roorkee (Utilization of RAP for Sustainable Concrete Pavements)
  6. Dr. P Mastanaiah, IIT Hyderabad (Electron Beam Welding and Friction Stir Welding of Dissimilar Aluminium Alloys (AA2219 and AA50830)
  7. Dr. Raosaheb Ananda Farakte, Institute of Chemical Technology (ICT), Mumbai (Transport Phenomena in Multiphase processes)
  8. Dr. Lokamanya Chikmath, IIAEM, Jain University, Bengalore. (Non-linear prognostic analysis of fastener joints for structural health monitoring applications)
  9. Dr. Atasi Dan, IISc. Bangalore (Spectrally Selective tandem absorbers for photothermal conversion in high temperature solar thermal systems)
  10. Dr. Nithin Chandran, IIT Kharagpur (Sequence and structural analysis of RNAs and their interactions with proteins)

Master’s Level

  1. Mr. Shivam H Ribadiya, Chandubhai S Patel Institute of Technology, Charusat, Gujarat (Time Synchronization Protocol using NavIC)
  2. Mr. Rishab Anand, IIT Bombay (Simplified Control Strategy for Inhomogeneous Series-Connected Battery Strings)
  3. Mr. Vikram Kishore Bharti, IIT Hyderabad (Carbon-Sulfur Composites as High Performance Cathode Materials for Lithiuim-Sulfur Batteries)
  4. Ms Neethu M, Indian Institute of Space Science and Technology (IIST), Thiruvananthapuram (Actuator Interface Board Design for Momentum-biased Cubesat ADCS)
  5. Ms Ruchika Zalpouri, College of Agricultural Engineering and Technology, Punjab Agricultural University, Ludhiana (Development and Evaluation of Refraction Based System for Dehydration of Potato)

Bachelor Level

  1. Mr. Gandikota Rohit, Indian Institute of Space Science & Technology (IIST), Thiruvananthapuram (Harnessing Deep Generative Models for Multimedia Data Hiding)
  2. Ms Sharmila Reddy Nangi, IIT Kharagpur (A Deep Generative Model for Code-Switched Text)
  3. Ms Archana CM, Indian Institute of Space Science & Technology (IIST), Thiruvananthapuram (Dodecagonal Voltage Space Vector Based Direct Torque Control Scheme for Open-End Winding Induction Motor with a Single DC Source)
  4. Ms Sneha Gem Mathew, Indian Institute of Space Science & Technology, Thiruvananthapuram (Low Complexity Cyclostationary Feature Detection using Sub-Nyquist Samples)
  5. Mr Bala Suraj Pedasingu, IIT Tirupati (ALTO: Adversarial Learning for Tracking Objects)
  6. Mr. Suraj R, Indian Institute of Space Science & Technology (IIST), Thiruvananthapuram (PS4Net: An Opportunistic Software Defined Networking Framework Over PSLV Stage 4)
  7. Mr. O Vamshi, Mr. V Charan, Mr. G Raja Vallabh and Ms. Aishwarya Reddy, Mahatma Gandhi Institute of Technology (MGIT), Hyderabad (Path Correcting Multi-Purpose Agricultural Robot)
  8. Mr. K Lakshman Vedavyas and Ms L Pooja Mahatma Gandhi, Institute of Technology (MGIT), Hyderabad (Effect of Milling Time and Optimization of Poling Conditions on Piezoelectric Properties of BCZT Ceramics)
  9. Mr.  Gracio Joyal Lobo, Ms. Amrutha K, Mr. Dumpeti Vineeth and Mr.  Medisetti Swami Charan, International Institute for Aerospace Engineering and Management, Jain University, Bangalore. (Tubercles Effect on a Wing Performance for NACA  634-421 Aerofoil)
  10. Mr.  J Chandra Bose, Mr. G Mohan Kumar, Mr.. A Muthushivashankar and Mr. CB Raambalagi National Engineering College, NEC, Kovilpatti (Experimental Study on Bio-Concrete by Partial Replacement of Fine Aggregate Using Medical Vial waste)

2018

Doctoral Level

  1. Dr. Abhijit Chandra Roy, Indian Institute of Technology (IIT), Kanpur (Soft Aspherical Optical lens)
  2. Dr. Brince Paul, Indian Institute of Technology (IIT), Hyderabad (Zinc Oxide Nanowire Based Biosensors on Flexible Substrate for Point-of-Care- Applications)
  3. Dr. Jopaul K Ignatius, Indian Institute of Technology (IIT), Madras (Aeroacoustics of free and impinging jets and its suppression in a launch vehicle lift-off ambience)
  4. Dr. Manugula Vijayalakshmi, University of Hyderabad, Hyderabad (Advanced Methods of Joining for Indian Reduced Activation Ferritic-Martensitic Steel)
  5. Dr. Manas Kumar Jena, Indian Institute of Technology (IIT), Delhi (Application of Synchrophasor Measurements for Enhanced Back-up Protection and Situational Awareness)
  6. Dr. Saptarshi Ghosh, Indian Institute of Technology (IIT), Kanpur (Studies on Multi-band and Broadband Absorbers based on Passive/Active Frequency Selective Surfaces)

Master’s Level

  1. Mr. Jayeshkumar Sevantilal Mevada, Institute of Chemical Technology, Mumbai (Intensification of Intracellular Enzyme Recovery)
  2. Mr. Rajarshi Roychaudhuri, Indian Institute of Engineering Science and Technology, Shibpur (Self Assembled Nano-Heterostructures of MnO2 for Efficient Vapor Sensor Device Applications)

Bachelor Level

  1. Mr. Saikat Dey, Indian Institute of Engineering Science and Technology, Shibpur (SiC MOSFET based Resonant Power Electronic Converters for High Frequency Applications)
  2. Ms R.Hemalatha, St. Joseph’s College of Engineering, Chennai (Fabrication of Novel Pesticide detection tool and its application in Food samples)
  3. Mr. Vishwaraj Srivastava, Jamia Millia Islamia, New Delhi (Development of Haptic Gloves for its use as an Assistive Technology for Blinds Using Augmented and Mixed Reality)
  4. Mr. Hariharan S., Mr. Gowatham Raju C and Mr. Santhana Bharathi M Alagappa College of Technology, Anna University, Chennai (Development of Cost Effective Matte Glaze For Double Firing Wall Tiles and Their Behavior Studies)
  5. Mr. Aathira Vijaykumar Hegde, Indian Institute of Space Science and Technology (IIST), Thiruvananthapuram (Current Error Space Vector PWM based Speed Sensor-less Field Oriented Control of Induction Motor Drive with Stator Resistance Estimation)
  6. Mr. S. Akash, Mr. M. Arun Karthik and Mr. G. Bharath Raj Sri Venkateswara College of Engineering, Tamil Nadu (Adaptive Distance Protection Scheme with Compensation for Infeed in Smart Grid Environment)
  7. Mr. Litu Rout, Indian Institute of Space Science and Technology (IIST), Thiruvananthapuram (Boosting Visual Object Tracking Performance Using a Stack of Machine Learning Algorithms)
  8. Ms Anupama Arun, Indian Institute of Space Science and Technology (IIST), Thiruvananthapuram (Dictionary Learning based algorithms for Compressed Sensing based reconstruction of Undersampled Magnetic Resonance Imaging Data)

2017

Doctoral Level

  1. Dr.Anirban Roy, Indian Institute of Technology Kharagpur (Ultra Low Cost Indigenous Technology For Spinning Of Hemodialysis Hollow Fiber Membranes)
  2. Dr.Anindya Pain, CSIR-Central Buiding Research Institue, Roorkee. (Modified Pseudo-Dynamic Method For Seismic Earth Pressure and Associated Problems)
  3. Dr. NS Karthiselva, Indian Institute of Technology, Madras. (Simultaneous Synthesis and Densification of Ultrahigh Temperature Ceramics and Composites by Reactive Spark Plasma Sintering)
  4. Dr.Gourab Dutta, Indian Institute of Technology, Madras. (Effect of Gate Dielectric Engineering on the Performance of Gan-Based Mis-Hemts)
  5. Dr. Adarsh Patel, Indian Institute of Technology, Kanpur. (Robust Spectrum Sensing for Multiple-Input Multiple-Output (Mimo) Cognitive Radio Networks)

Master’s Level

  1. Mr. Mahenderan C, Indian Institute of Space and Technology, Thiruvananthapuram (Experimental Investigation of Spray and lame Characteristics in a SwrilStablized Burner)
  2. Mr. Jibin T Philip, Saintgits College of Engineering, Kottayam (Synthesis Of Surfactant- Modified Ceria-Zirconia Hybrid Nanoparticles And Evaluation Its Tribolgical Properties As An Additive In Coconut Oil)
  3. Mr. L Karthikeyan, Indian Institute of Space and Technology, Thiruvananthapuram (Optically- Activated Zno Nanomaterial For Hydrogen Gas Sensor and its Correlation With Photoluminescence Spectra)
  4. Ms. Shreyasi Som, Indian Institute of Technology, Bhubaneswar (Low Voltage DC Microgrid Protection)
  5. Ms Pallavi Venugopal M, Indian Institute of Space Science and Technology, Thiruvananthapuram(Computationally Efficient Deep Tracker : Guided MDNET)

Bachelor Level

  1. Padala Suresh Kumar, Indian Institute of Technology, Delhi. (Modelling Chloridvirene Ingress in Concrete Exposed to Oceanic Wave Splash)
  2. A.Raghu, P Bharath Kumar and K.Sarika, Mahatma Gandhi Insitute of Technology, Hyderabad (Preliminary Evaluation of Multilayer High Temerature Coatings on Cf-SiC Composites)
  3. Pavithraa Devi A, Vignesh Shankar And Yashvi Singh, National Institute of Technology, Tiruchirappalli (High Temperature Erosion and Oxidation Behaviour of Gas Nitrided Valve Steel for IC ENGINE)
  4. Mallikarjun.S.E, Salil Chadha, Shubham Sham Sangodkar and Sudeep Dev S International Institute for Aerospace Engineering and Management, (IIAEM, JAIN UNIVERSITY) (Design, Analysis and Testing of Foldable Winglet for a Flying Wing Muav (Mini Unmanned Aerial Vehicle) Configuration)5 Chidambaram. SP, SakthishCharan. P, Saravanan. K and Sai Krishna. B , Sri Venkateswara
  5. College of Engineering, Sriperambudur Tk, Kancheepuram (Design of Variable Braking System Using Intelligent Dual Calipers)
  6. Sant Saran, Dayalbagh Educational Institute, Agra. (Study of Optogenetic Control of Neuronal Signalling)
  7. Saurav Chandel and Piyush Menghani, Delhi Technological University, Delhi (High Efficiency High Power Density Isolated DC-DC Resonant Converter)
  8. Divyansh Chourey, Bhilai Institute of Technology, Durg, CG (Forecasting The Frequency Of Power Grid For Optimal Frequency Stabilization Using Neuro-Fuzzy System On Matlab Based Platform)
  9. S Nivetha and K Priyanka, St. Joseph’s Institute of Technology, Chennai (Fool Proof Centralized Voting Machine Using Automation Systems)
  10. Karthicraja VM and Krishna Prasad VL, St. Joseph’s College of Engineering, Chennai (Cassandra-IOT In Women Safety)

2016

Doctoral Level

  1. Dr (Ms) Sunitha K Nayar, Indian Institute of Technology, Madras (Design of Fibre Reinforced Concrete Slabs-on-Grade and Pavements)
  2. Dr Ravinder Kumar Duvedi, Thapar Institute of Engineering & Technology University, Patiala (Tool Positioning Algorithms for Improved Machining of Triangulated Surfaces)
  3. Dr Tanmoy Chakraborty, Indian Institute of Technology, Kharagpur (Community Analysis in Large Networks: Methods and Applications)
  4. Dr Santanu Talukder, Indian Institute of Science, Bangalore (Study and Control of Electromigration Driven Material Transport For Applications in Nanofabrication and Patterning)
  5. Dr Sasikumar P, Indian Institute of Technology, Madras (Uncertainity Quantification and Reliability Analysis of Laminated Composite Structures with Spatial Random Inhomogeneities)

Master’s Level

  1. Mr Sourav Sengupta, Indian Institute of Technology, Kharagpur (Modelling of Non-solvent Induced Phase Separation during Membrane Casting)
  2. Mr Vibhor Pandhare, Indian Institute of Technology, Indore (A Social Network For Machines – Realizing Industry 4.0)
  3. Mr. Sandip Mondal, Indian Institute of Engineering Science and Technology, Shibpur (Application of Biotechnology in Concrete)
  4. Mr Abhijit A Datta, Indian Institute of Technology, Bombay (Design and Development of a novel 2.5 KVA Two-Stage Transformer-Less Grid-tied PV System Based on SiC Devices with Emergency Battery-Backup)
  5. Ms Chandreyee Sarkar, Institute of Radio Physics and Electronics, University of Calcutta (Engineered Ground Plane for Dielectric Resonator Antenna to Resolve an issue of Practical Mount)

Bachelor Level

  1. Agarshna Murari M, Karthik G., Balachandar R. and Ashwin Nambi Sri Venkateswara College of Engineering, Sriperumbudur (Design and Fabrication of a Pneumatically Actuated Exoskeleton for Sitting Posture to Reduce Labour Fatigue)
  2. Chiluka Soniya, Dandu Mukul Sri, Ravul Rikitha and V Jaydev Kumar Mahatma Gandhi Institute of Technology, Hyderabad (Design and Development of Prototype of an Android Based Agricultural Robot with Motorized Shovel Control System and Automatic Seed Dispensing System)
  3. Gaurav Mittal, Kaushal Yagnik and Mohit Garg Indian Institute of Technology, Ropar (SpotGarbage: Smartphone App to Detect Garbage Using Deep Learning)
  4. S. Anand Raj, P. Praveenkumar, S. Siva and B. Thangamariappan National Engineering College, Kovilpatti (Automatic Lifting System for Physically Challenged people to board the Indian trains)
  5. Kakanuru Sumithra Indian Institute of Space Science and Technology, Thiruvananthpuram (Integrated Algorithm for Tracking Using KCF and TLD and its Extensive Evaluation)

2015

Doctoral Level

  1. Dr Jagadish Vengala, BMS College of Engineering, Bangalore (Seismic Response Study of Bamboo Based Constructions)
  2. Dr Vaibhav Singhal, Indian Institute of Technology Kanpur (Effect of Toothing and Openings on Bi-directional Seismic Behaviour of Confined Masonry Walls)
  3. Dr P Chandrasekhar, Indian Institute of Technology Delhi (Design of Smart Controllers for Active Distribution Systems)
  4. Dr Arnab Hazra, Indian Institute of Engineering Science and Technology, Shibpur (Development of p and n Type TiO2 Nanostructure Based Devices for Alcohol Sensing)
  5. Dr Sreekanth Mandati, Indian Institute of Technology Hyderabad (Fabrication of CuInSe2 and Cu(In,Ga)Se2 Absorber Layers by Pulse and Pulse-reverse Electrochemical Techniques for Solar Photovoltaic Applications)

Master’s Level

  1. Mr Vignesh S., Sri Venkateswara College of Engineering (Design of robotic Manipulator Using Magnetorheological Fluids for Handling Soft and Fragile Objects)
  2. Mr Siddhartha Moulik, Indian Institute of Chemical Technology (Hydrodynamic Simulation and Molecular Modeling of Membrane Processes for Solving Challenging Separation Problems)
  3. Ms Shital Yadav, Indian Institute of Technology Hyderabad (Polymer submicron – and Nano- Fibers Applications in healthcare, drug delivery, Oil Spill Remediation and Print Transfer technique)
  4. Ms Meenakshi Sarkar, CSIR Central Mechanical Engineering Research Institute Durgapur (Design of Robust Controller to Achieve Optimal performance of Autonomous Vehicles)
  5. Mr Sayan Dey, Jadavpur University, (Porous Nickel (III) Oxide Nanostructures: Study of its Defects by Positron Annihilation Technique and its Environmental and Electronic Applications)

Bachelor Level

  1. Mr Srimathan S, Mr Srinivasaprasad S and Mr Subash G Sri Venkateswara College of Engineering (Turmeric Harvester as a Tractor Attachment)
  2. Mr G Vignesh and Mr S Aakash, St Josephs College of Engineering , (Design and Development of 3D Printer)
  3. Mr R Solomon Jeshur Raja and Mr AV Vamsi Krishna, St Joseph’s College of Engineering, (Effect of Dynamically Controlled Reflectors on the Performance of Solar Panels)
  4. Mr D Vinod, Mr Ankit Murarka and Mr Sri Satya Teja, SRM University, (Low Cost Single Character Braille Display Setup for Deaf-Blind)
  5. Mr Syed Ghazi Sarwat, PSG College of Technology, Coimbatore , (Advance Microscopy and Modeling of Energy Materials)
  6. Ms T Ramya, Mahatma Gandhi Institute of Technology, (Creep Damage Evaluation of DS CM247 Nickel Base Superalloy Using ACPD Technique)
  7. Ms Ramashree T and Ms Sajini R, Sri Venkateswara College of Engineering, (PCR Amplification of TEM Gene of ESBL Escherichia Coli From soil Samples)
  8. Mr Jothivanan E and Mr Vamsi Bharadwaj YV, St Josephs College of Engineering ,(Dy Agram (Beta) – A Unique DNA Based Ink and Hologram for Authentication Security)

2014

Doctoral Level

  1. Dr Kranthi Kumar Maniam, Indian Institute of Technology Madras (Development of Shape Controlled Palladium Structures as Electrocatalysts for Fuel Cell Applications)
  2. Dr G Sivakumar, Indian Institute of Technology, Bombay. (Understanding Solution Precursor Plasma Spray Process to Deposit High Performance Ceramic Coatings)
  3. Dr. Sandip Chakraborty, Indian Institute of Technology, Guwahati. (Capacity Enhancement, QoS and Rate Adaptation in IEEE 802. 11S: A Performance Improvement Perspective)
  4. Dr Jeevanjyoti Chakraborty, Indian Institute of Technology Kharagpur. (Electrokinetics in Narrow Fluidic Confinements: The Role of Streaming Potential)
  5. Dr. Himanshu Sharad Bhatt, Indraprastha Institute of Information Technology, Delhi. (Emerging Covariates of Face Recognition)

Master’s Level

  1. Mr P Pravin Kumar Venkat Rao, Visvesvaraya National Institute of Technology Nagpur. (Effect of Seismic Zone & Storey Height on response Reduction Factor for Steel Moment Resisting frame)
  2. Mr Parthsarathi Pachori, Indian Institute of Technology Kharagpur (Energy Integration in Refinery Distillation Columns -A Simulation Study)
  3. Mr. Krishan Kant, Indian Institute of Technology Delhi. (Design, Control and Implementation of Brushless Generators Based Standalone Microgrid)
  4. Mr. Debranjan Mukherjee, Indian Institute of Technology, Kharagpur. (Voltage Sensor-less Space Vector Control of Vienna Rectifier with Programmable Input Power Factor)
  5. Mr S Balamurugan, National Engineering College, Kovilpatti. (Leaf Based Cotton Plant Identification Using OMAP)

Bachelor Level

  1. Anirban Paul, Nitish Kumar and Shikha Maharana Indian Institute of Space Science and Technology (IIST) (Polymer MEMS with novel transduction techniques)
  2. Harish Rammohan S St Joseph’s College of Engineering, Chennai.
    (Design of Gyroscopically Controlled biomorphic robot and gait generation for assisted walking of humans)
  3. Ashish Tatolu and Surabissree M DI Sri Venkateswara College of Engineering, Tamilnadu.
    (InvitroStudies on the Binding of Mangiferin to IL4 Receptor of B lymphocytes)
  4. Akash Vinit Mehta, Urvish Kishore Patel, Rajeev Mohan Panthai and Viral Ramesh Jain St John College of Engineering and Technology, Maharashtra.
    (Alternative to Natural Sand)
  5. Shivam Chourey Indian Institute of Technology, Patna
    (Development and Control of Magnetically Controlled Micro-robots)

2013

Doctoral Level

  1. Dr Chandan Karfa, Indian Institute of Technology Kharagpur
    (Formal Verification of Behavioural Transformations During Embedded System Design)
  2. Dr Sandeep Anand, Indian Institute of Technology Bombay, Mumbai
    (Interface Circuits and Controllers for Effective Utilization of Solar Photovoltaics)
  3. Dr Manmohan Dass Goel, Indian Institute of Technology Delhi
    (Blast Response of Structures and its Mitigation Using Advanced Lightweight Materials)
  4. Dr. A Shahin, Indian Institute of Technology, Kanpur
    (Phase Behaviour and Soft Glassy Rheology of Aqueous Laponite Suspensions)
  5. Dr Pijus Kundu, Indian Institute of Technology Kharagpur
    (Performance Enhancement of Microthruster Using Nano-Engineered MEMS structure for Long Term Space Mission)

Master’s Level

  1. Christy Jojy, Department of Computer Science, University of Kerala, Thiruvanthapuram
    (SAR Image De-Speckling Using Importance sampling Unscented Kalman and Non Local Means Filters)
  2. Hrilina Ghosh, Bengal Engineering and Science University, Shibpur
    (Silicon Oxide Nanoporous Structures for Sensitive Toxin Detection)
  3. Mr Srinadh Mattaparthi, Indian Institute of Technology Hyderabad
    (Biomimicked Polymeric Surfaces Exhibiting Superhydrophobic and Antireflective Properties)
  4. Rahul, School of Engineering Sciences and Technology, University of Hyderabad
    (Development of Novel Nano Composites Using Unique approaches and Their Mechanical & Tribological Characteristics)
  5. Mr Vijay Bhooshan Kumar, School of Engineering Sciences and Technology, University of Hyderabad
    (Core Shell Nanostructure of PCL, PCL@SiO2, ZnO-SiO2 and their Physical Properties and Biomedical Applications)

Bachelor Level

  1. Parag Agrawal and Rishi Barua Indian Institute of Technology, Guwahati
    (Learning Weakness of Players from Cricket Text Commentary)
  2. Anirudh Vasudevan, Ashwin Kumar M and Chandrasekar MG Sri Venkateswara College of Engineering, Sriperumbudur
    (Power Harvesting Tile Using Piezo Disk Element Matrix)
  3. Kaustubh Umathe, Ajay Jamodkar, Ameya Chandrayan and Anil Kumar Visvesvaraya National Institute of Technology, Nagpur
    (Unified Multi-Input DC-DC Converter for Hybrid Distributed Generating Systems)
  4. Sivagurunatha Pandian M, Shivaraman I, Shreenath M and Sundaraganesh G Easwari Engineering College, Chennai
    (Wireless Communication and Security Embedded Saftey Helmet)
  5. Varun Vishnudas Verlekar, Ankit Prakash Naik, Avinash Gupta and Gaurav Sunil Revalkar Goa College of Enginerring, Govt. of Goa
    (Design and Analysis of Multi-axis 3D Machining Unit)
  6. Yallappa D, College of Agricultural Engineering, Raichur
    (Design, Development and Performance Evaluation of Pedal Operated Flour Mill)
  7. Rohit Thakwani, National Institute of Technology Silchar
    (Solar Powered Wheelchair)
  8. Satish Kumar S and Rohan Kanna C SRM University, Kancheepuram Distt (TN)
    (Automated Vehicle Speed Management Assisted with GPS)
  9. Akhil S Anand and Yesaswi Narendra Chilamkurti Indian Institute of Technology, Patna
    (Design and construction of Flapping Wing MAV)
  10. Mr Prashant Sharma and Mr Manoj Kumar Ellur International Institute for Aerospace Engineering and Management, Jain University, Bangalore
    (Analysis of Flight Test Data from Helicopter Development Programme)

2012

Doctoral Level

  1. Dr. Amit Kumar Jain, Indian Institute of Science, Bangalore
    (Control of High Power Wound Field Synchronous Motor Drives : Modelling of Salient Pole Machine Control Using VSI, LCI and Hybrid LCI/VSI Converters)
  2. Dr.Shibayan Roy, Indian Institute of Science, Bangalore
    (Role of Boron on the Evolution of Microstructure and Texture in Ti-6Al-4V-0.1B Alloy)
  3. Dr. V Pramitha, Cochin University of Science and Technology, Kerala
    (A new metal ion doped panchromatic photopolymer for holographic applications)
  4. Dr. Abhijeet B Joshi, Indian Institute of Technology, Bombay, Mumbai
    (Nano-Engineered Lactate Biosensor)
  5. Dr. Devanjan Bhattacharya, Indian Institute of Technology Roorkee
    (Development of a Geo-hazard Warning Communication System)

Master’s Level

  1. Mr. Sanhtosh Prabhu M, Indian Institute of Technology Kharagpur.
    (Formal Verification of abstract digital controllers for hybrid systems)
  2. Mr. Gokul B, Indian Institute of Technology Madras, Chennai
    (Development of a Multifunctional Sensor Network with an optimized Communication Protocol for Industrial Process Monitoring)
  3. Mr. Pardeep Garg, Indian Institute of Science, Bangalore
    (Alkane and inert additive mixtures as working fluids for organic Rankine cycles)
  4. Ms. B Nandini, Indian Institute of Technology, Kharagpur
    (Novel Soft Lithographic Fabrication of Superhydrophobic Surfaces and their Durability Studies)
  5. Mr. Indrajit Sarkar, Bengal Engineering and Science University Shibpur, Howrah
    (Modification of Input Filter circuit to realize Stepless Communtation in Matrix Converter – PSpice Simulation Study and Experimental Verification.)

Bachelor Level

  1. Joshi Kumar A.V., Madhan Prabhu T. and Mohan Raj S.
    Sri Sai Ram Engineering College, Chennai
    (Visual Cognition: A Pragmatic Approach for Visually Impaired Using Android)
  2. Mr. Sanuj Govind Agrawal, Mr. Sumit Shrikrishna Naik and Mr. Bhusan Bharat Patil
    S.S.B.T”s College of Engineering and Technology, Bambhori, Jalgaon Maharashtra
    (Green Air Conditioner with Double Cooling Effect)
  3. Surabathuni Pallav, Indian Institute of Technology, Patna
    (Design and Characterization of Einstein-Szilard Refrigerator)
  4. Rajnish Kumar Yadav, Indian Institute of Space Technology, Thiruvanthapuram
    (On the Use of undirected Probabilistic graphical Modeling for Cognitive wireless Networks)
  5. Mahadeva Subramanian H, Niranjan Balaji E and Meiyappan C
    Sri Venkateswara College of Enginering, Sriperumbudur
    (Security Enriched Electronic Ballot Box)
  6. S Hima Sundharam and M Mahalakshmi
    St Joseph’s College of Engineering, Chennai
    (Design and Implementation of Intelligent Robotic Fish)

2011

Doctoral Level

  1. Dr. Shruti Sharma, Thapar University, Patiala
    (Monitoring of Damage in Reinforcement in Concrete)
  2. Dr. Pritha Banerjee, Indian Statistical Institute, Kolkata
    (Fast Placement and Floorplanning Methods in Modern Reconfigurable FPGAs)
  3. Dr. Pralay Mitra, Indian Institute of Science, Bangalore
    (Algorithmic Approaches for Protein-protein Docking and Quaternary Structure Inference)
  4. Dr. Chandra Shekhar Sharma, Indian Institute of Technology, Kanpur
    (Synthesis, Fabrication and Properties of Carbon based Multiscale Micro and Nano Structures)
  5. Dr. Subba Reddy B, Indian Institute of Science, Bangalore
    (A Novel Technique for Enhancing the Pollution Flashover Strength of Ceramic Disc Insulators)
  6. Dr. Kaushik Bhattacharyya, Indian Institute of Technology, Kharagpur
    (Design and Implementation of Switched Capacitor based embedded DC-DC Buck Converter)

Master’s Level

  1. Mr. Sambit Bakshi, National Institute of Technology, Rourkela
    (Development of Robust Iris Localization and Impairment Pruning Schemes)
  2. Ms.Priyanka N, Sri Venkateswara College of Engineering, Sriperumbudur
    (A Boost Converter with an Active Clamp Circuit for High Intensity Discharge Lamp Application)
  3. Mr. Adithya Kumar Pediredla, Indian Institute of Science, Bangalore
    (Robust Cell Detection and Active Contour Models for Cell Segmentation)
  4. Mr. Vikas Singh, Indian Institute of Technology, Madras, Chennai
    (Design of High Speed, High Resolution Continuous-Time Delta Sigma Modulator)
  5. Mr. Gopinath T, Bengal Engineering and Science University, Shibpur
    (Structure and Properties of Diffusion bonded joints between Stainless Steel and Titanium Alloy with Interlayer)

Bachelor Level

  1. Mr. Ankit Chhabra Visvesvaraya National Institute of Technology, Nagpur
    (Modal Mass Criteria for Optimum Tuned Mass Dampers)
  2. Mr. Ayan Dutta and Mr. Suparno Datta Heritage Institute of Technology, Kolkata
    (Distributed Algorithm for Circle Formation by Anonymous Transparent Fat Robots)
  3. Ms. Sujatha Krishnaswamy Sri Venkateswara College of Engineering, Sriperumbudur (TN)
    (A Certificateless designated verifier ring signcryption scheme-Design and Implementation)
  4. Ms. F. Menaka Mischella and Ms. Lasante Christina St.Joseph’s College of Engineering, Chennai
    (Navigation Database Decoder)
  5. Mr. Saravanan S St.Joseph’s College of Engineering, Chennai
    (Design and Development of a Multi-purpose Air-conditioner)
  6. Mr. U Mahendaran and Mr. M Prasanth PSG College of Technology, Coimbatore
    (Design and Development of Smart Wing Using SMA)
  7. Ms. Saranya M, Mr. Swaminathan S and Mr. Vijay Karthick B Sri Venkateswara College of Engineering, Sriperumbudur (TN)
    (SMART-The Automated Food Concocter)
  8. Mr. J Srinivasan Muthayammal Engineering College, Namakkal (TN)
    (Real-Time Remote Crack Detection System for Railway Track using Time Domain Reflectometer (TDR))
  9. Mr. Nelson Naveen I and Ms. Princy Perpetua C St.Joseph’s College of Engineering, Chennai
    (Real Time Implementation of GPS based Maritime border indicator for Fishermen)

2010

Doctoral Level

  1. Dr. S Vinodh, PSG College of Technology, Coimbatore
    (Investigations on the Development of Total Agile Design System in a traditional manufacturing environment.)
  2. Dr. Sadiq A, Indian Institute of Technology Madras, Chennai.
    (Investigations into Magnetorheological Abrasive Honing (MRAH)
  3. Dr. Vincent G, Indian Institute of Technology Madras, Chennai.
    (High Power Voltage Source Inverter Topologies and Current Control Strategies for DSTATCOM Applications.)
  4. Dr. Preetinder Kaur, College of Agricultural Engineering & Technology, Punjab Agricultural University, Ludhiana.
    (Mathematical Modeling of Macro-perforated Modified Atmosphere Packaging for Fresh-cut Vegetables)

Master’s Level

  1. Ms. Seetha N, Indian Institute of Technology Roorkee.
    (Effect of Organic Shock Loads on Activated Sludge-Biofilm Reactor)
  2. Ms. Hunny Mehrotra, National Institute of Technology Rourkela, Rourkela.
    (Iris Identification using Keypoint Descriptors and Geometric Hashing)
  3. Ms. Diptimayee Samantaray, Homi Bhabha National Institute.
    (Thermo-viscoplastic constitutive Modeling of high temperature flow behaviour of an austenitic stainless steel and a ferritic steel).
  4. Ms. Swati Sharma, Sardar Vallabhbhai National Institute of Technology, Surat.
    (Degradation of 4-chlorophenol in wastewater by organic oxidants.)
  5. Mr. Pabitra Palai, Indian Institute of Technology Bombay, Mumbai
    (Development of Ultra Fine Grained AZ80 Mg alloy by Severe Plastic deformation and Evaluation of its Mechanical Properties)

Bachelor Level

  1. Mr. P Nirmal Kumar, Ms. G Gangha, Ms . Kalaimathi, Ms. P Kayalvizhi Pondicherry Engineering College, Puducherry
    (Seismic Hazard Analysis of Puducherry Region)
  2. Mr. Rohit Banga, Mr. Akhil Langer Indian Institute of Technology Roorkee
    (Providing Natural Language Interface to health Care Services Over SMS)
  3. Mr.Ashfaq Shaikh, Mr. Abhishek Gachche, Mr. Mohan Nalawade, Mr. Rajan Paramoji Hirasugar Institute of Technology, Nidasoshi
    (Rice Husk Gasifier Stove)
  4. Mr. Arun M, Mr. Jayanth Kumar T, Mr. Murugan G, Mr. Mano R Sri Venkateswara College of Engineering, Sriperumbudur
    (Design and Modelling of Mechanised Rotating Fixture For Under Frames in Railway Coaches)
  5. Ms. Shreya Gupta, Mr. Moksha Udani, Mr. Antrix Patel Institute of Technology, Nirma University
    (Manufacturing of an API(Active Pharmaceutical Ingredient) – Aceclofenac)
  6. Mr. Nishant Sinha, Ms Priyanka Chaubey Sikkim Manipal Institute of Technology,
    (Active Sway Control of Single Pendulum Gantry Crane System)Mr. Vivek R, Mr. Swaminathan D, Mr. Sathya
  7. Narayana V Sri Venkateswara College of Engineering, Sriperumbudur
    (Design, Development and Validation of S-Band RF Power Amplifier)

2009

Ph.D Level

  1. Dr Karnail Singh, Research Engineer, GE, JFWTC, Bangalore
    (Understanding Film Formation Mechanism in Latex Dispersions)
  2. Dr. Ansuman Banerjee, Member of Consulting Staff, Interra Systems India Pvt Ltd, Kolkata
    (Formal Methods for Accelerating Formal, Semi-Formal and Dynamic Property Verification Through Novel Specification Styles)
  3. Dr. Chandrashekhar N Bhende, Assistant Professor, Electronics and Communication Engg.
    Department, Indian Institute of Technology, Guwahati.
    (Power Quality Analysis and Harmonic Control in Distribution Network)
  4. Dr. Sanjay Gairola, Professor and Head, Department of Electronics and Communication, IMS
    Engineering College Ghaziabad.
    (Multipulse AC-DC Converters for Power Quality Improvement)
  5. Dr. K Ashoka Reddy, QIP Research Scholar, Department of Electrical Engineering, Indian
    Institute of Technology Madras.
    (Novel Methods for Performance Enhancement of Pulse Oximeters)

M.E./M.Tech Level

  1. Ms. A Anu Mary, Research Scholar, CLAD, Central Leather Research Institute, Chennai.
    (Synthesis and Characterization of Hybrid Biodegradable Films from Collagenous Wastes and Cellulose Derivatives for Biomedical Application)
  2. Mr. Rajesh Balagam, Lab 1, Department of Chemical Engineering, Indian Institute of Science, Bangalore
    (Estimating the Effective Population size of HIV-1 in vivo)
  3. Mr. Madhu S Nair, Lecturer, Department of Computer Science, Rajagiri College of Social Sciences, Kalamassery, Kochi
    (Restoration and Enhancement of Color Images Using Fuzzy Approach)

B.E./B.Tech Level

  1. Mr. Prajwal S, Mr. Sreekumar CR, Mr. Narayan Prasad N and Mr. Nikhil BN
    Sri Bhagawan Mahavir Jain College of Engineering, Bangalore
    (Microsatellite Subsystem Design and Analysis)
  2. Mr. Lakshmanan S, Mr. Iniyan K, Mr. Keerthan Jagan Mohan and Mr. Vinoth Kumar E B
    Sri Ramakrishna Engineering College, Coimbatore
    (Design and Fabrication of Indexing Table with Fixture Implementing SMED and Cost Reduction)
  3. Mr. Nelvin Johny and Mr. Abel K Mathew
    St. Joseph’s College of Engineering, Chennai
    (Fabrication and Comparison of Rotary Valve Engine with Cam Assembly Engine)
  4. Mr. Nikhil Shah and Mr. Rachit Oza
    Nirma University, Ahmedabad
    (Recovery of Nickel from Spent Catalysts)
  5. Ms Joannah Ranjini Gabriel, Ms S Pratheeba and Ms Sharanya R Iyer
    St. Joseph’s College of Engineering, Chennai
    (A Non-Invasive Infant Monitoring System using CO2 Sensors)
  6. Mr. Fahad Ali Usmani and Mr. Shadab Mallick
    Zakir Hussain College of Engineering and Technology, Aligarh Muslim University, Aligarh
    (Performance Analysis of Analog Building Blocks in Technologies Beyond Silicon)
  7. Mr. Dinesh Singh J and Mr. Natarajan R
    Sri Sai Ram Engineering College, Chennai
    (‘ASTHRA’ – An Automated Robotic Vehicle for Disabled Patients Using Embedded Systems)
  8. Mr. Prathamesh Dhole, Mr. Tanmoy Sinha and Mr. Sumeet Nayak
    National Institute of Technology, Durgapur
    (Indigenously Built Low-Cost Online Dissolved Gas Analyser)
  9. Ms V Aishwarya Vedham and Ms S Priyadharshini
    St. Joseph’s College of Engineering, Chennai
    (Design and Implementation of PLC based Load Management System)
  10. Ms K Shashikala, Ms. M Sharmila, Ms K Sindhu and Ms R Sindhumathi
    Sona College of Technology, Salem
    (Weed Detection using Multiresolution Analysis)

2008

Ph.D. Level

  1. Dr. Rabibrata Mukherjee, Indian Institute of Technology, Kanpur. (Self Organization and Atterning of Soft Polymer Films)
  2. Dr. Soma Guhathakurta, Indian Institute of Technology, Madras, Chennai. (Processing of Bovine Pericardium as a Biomaterial in Cardiovascular Surgery)
  3. Dr. SR Samantaray, National Institute of Technology, Rourkela (A New Approach to Power System Protection using Time-Frequency Analysis and Pattern Recognition)
  4. Dr. Venkatesaperumal B, Indian Institute of Technology, Delhi. (An investigation on some operational aspects of a Generalized Impedance Controller Based Self Excited Induction Generator)

M.E./M.Tech Level

  1. Mr. Chandan Karfa, Indian Institute of Technology, Kharagpur (Hand-in-hand Verification and Synthesis of Digital Circuits)
  2. Mr. Rohan Paul, Mr. Dheeraj Mehra and Mr. Vaibhav Singh Indian Institute of Technology Delhi(Embedded System Assistive Devices for Enhancing Mobility for the Visually Challenged *User-triggered Bus identification and Homing System * Cane-mounted Knee-above Obstacle
    Detection and Warning System)

B.E./B.Tech Level

  1. Mr. Mridul Aanjaneya, Indian Institute of Technology, Kharagpur. (Excursions in Neighborhood Geometry of Tessellations)
  2. Mr. Arvind T, Ms. Nithya M and Ms. Pranayini.G Sri Venkateswara College of Engineering, Sri Perumbudur (TN) (T9++ – Rule Based Text Prediction in Mobile Messaging)
  3. Mr. C Karthik, Mr. Pradeep S Kanthan, Mr. Sivaganesh. M and Mr. Suresh S Anand Institute of Higher Technology, Kazhipattur (TN) (Design and Fabrication of a Continuously Variable Transmission System)
  4. Mr. Arivarasan K., Ms. Jeevitha S, Ms. Jyothi Lakshmi Ranganathan and Ms. Ramalakshmi A Sri Venkateswara College of Engineering, Sri Perumbudur (TN) (Remote Controlled Navigation of an Electrical Vehicle)
  5. Mr. G Bharath and Mr. N Swaminathan St Joseph College of Engineering, Chennai (Advance Control and Automation of Wheelchair)

2007

Doctoral level

  1. Dr. BS Munjal, Gujarat University
    (Finite Element Analysis, Design & Development of Smart Skin Spacecraft Antenna Reflectors Using Intelligent/Smart Materials & Structural Systems)
  2. Dr. Atul Srivastava, Indian Institute of Technology, Kanpur
    (Optical imaging and control of convection around a KDP crystal growing from its aqueous solution)
  3. Dr. S Senthilvelan, Indian Institute of Technology, Madras, Chennai
    (Design, Development and Performance of Injection Molded Polymer Composite Gears)
  4. Dr. Kaushik Nath, Indian Institute of Technology, Kharagpur
    (Studies on Biological Hydrogen Production by Two – Stage Fermentation Process)
  5. Dr. Sanjay P Kamble, Institute of Chemical Technology, Matunga, Mumbai
    (Photocatalytic/Photochemical Mineralization of Pollutants)
  6. Dr. Vipin Kumar, Indian Institute of Technology, Delhi, New Delhi
    (Power Quality Improvements at AC Mains in Variable Frequency Induction Motor Drives)

Master’s level

  1. Wg Cdr. S Bharadwaj, Defence Institute of Advanced Technology, Pune
    (Design and Fabrication of the Fuzzy Logic Controller for an Autonomous Mobile Robot)
  2. Mr. Pankaj Kumar Sa, National Institute of Technology, Rourkela
    (Development of Impulsive Noise Removal Schemes)
  3. Mr. Arup Kumar Das, Indian Institute of Technology Kharagpur
    (Studies on nucleate boiling and bubbling process through submerged orifices)
  4. Mr. Kaushik Sengupta, Indian Institute of Technology, Kharagpur.
    (Mode-Locking in Nonlinear Non-autonomous Communication Systems : Stability and Phase Noise Analysis)

Bachelor level

  1. Mr. S Alvin Christopher Julius, Mr. S Praveen Kumar; Mr. G Saravana Kumar and Mr. K Ravishankar.
    Sri Ramakrishna Engineering College, Coimbatore
    (Design and fabrication of bush driving, block crimping and driving unit)
  2. Mr. NR Karthikeyan,
    PSG College of Technology, Coimbatore
    (Study of thermal properties of copper and copper oxide nanofluid)
  3. Mr. S Sathis Kumar
    Bannari Amman Institute of Technology, Sathyamangalam
    (A Novel Approach to Process Cotton & Long-Staple Fibres (Wool/Silk/Polyster) on Short-Staple Ringframe)

2006

Doctoral Level

  1. Dr. Shashi Kumar Singh, College of Agricultural Engineering, Punjab Agricultural University, Ludhiana
    (Design and Development of a Tractor Mounted Air-Assisted Sprayer for Cotton)
  2. Dr. Shyam Sunder Kapdi, Indian Institute of Technology, Delhi
    (Development of Biogas Enrichment & Compression System for Rural Energy Applications)
  3. Dr. A Kamaraj, Agricultural Engineering College and Research Institute, Tamil Nadu Agricultural University, Coimbatore
    (Eco Friendly Fuel Production from Sago Industrial Wastewater through Hybrid Reactor)
  4. Dr. Goutam Mukherjee, Government College of Engineering and Leather Technology, Kolkata
    (Studies on Eco-Friendly Process Innovations in Tannery Operations)

Master’s Level

  1. Ms. Gopika Arora, College of Agricultural Engineering, Punjab Agricultural University, Ludhiana
    (Effect of Enzymatic Pretreatment on Milling Characteristics of Basmati Rice)
  2. Ms. Shuchi Verma, Indian Institute of Technology, Roorkee
    (Studies on Microbial Degradation of Oily Sludge)
  3. Mr. Gagandeep Bakshi, College of Agricultural Engg, Punjab Agricultural University, Ludhiana
    (Studies on Low Cost Processing of Okra)
  4. Mr. Jeny Rajan, University of Kerala, Thiruvananthapuram
    (Image Denoising using Partial Differential Equations)
  5. Mr. Tamal Das, Indian Institute of Technology, Kharagpur
    (Micropatterning of Concanavalin A by Microcontact Printing)
  6. Mr. Jitendra Solanki , Indian Institute of Technology, New Delhi
    (Design, Control and Implementation of Distribution Static Compensator (DSTATCOM)
  7. Mr. Prabhat Kumar Agnihotri, Indian Institute of Technology, Kanpur
    (Synthesis and Characterization of Carbon Nanotubes on the Surface of Carbon Fiber for Structure Applications)

Bachelor Level

  1. M. Mohan Kumar, E. Narayanan, L. Siva Kumar and J. Vijaya Pandi
    Sri Ramakrishna Engineering College, Coimbatore
    (Design and Fabrication of 100T Four Pillar Upstroking Hydraulic Cure Press)
  2. Aravindh C, Balaraman. R and Janaki Raman B
    Sri Venkateswara College of Engineering, Sriperumbudur
    (Parametric Analysis of Transesterification of Pungam Oil)
  3. M R. Aravind Raghavendra R Arun, H Chidambaram and V Yuvaraj
    Sri Sai Ram Engineering College, Chennai.
    (Fabrication and Automation of PLC based 3 in 1 Multipurpose (LMD) Machine Centre)
  4. Prashant C., St. Joseph’s College of Engineering, Chennai
    (A Study on Production of Docosahexaenoic Acid from Thraustochytrid)
  5. Y. Yoga Priya and R.D. Sagilla
    S.K.R. Engineering College, Chennai
    (Railway Station Signaling System using Embedded System)
  6. S. Sundarraj, Sri Venkateswara College of Engineering, Sriperumbudur
    (IVoiS-Interactive Speech Operated Switch with Speaker Authentication)
  7. R. Aravind and E. Eben Raja
    St. Joseph’s College of Engineering, Chennai
    (Computer Aided Instrumentation for Respiration Monitoring System Using Pressure and Optoelectronic Sensors)
  8. Sneha Gupta, Indian Institute of Technology, Bombay
    (Nanocrystalline Silicon Formation Through Aluminium Induced Crystallization)

2005

Doctoral Level

  1. Dr. Somashekhar S. Hiremath, Indian Institute of Technology, Madras, Chennai
    (Finite Element Modeling and Analysis of the Fluid Structure Interaction in Hydraulic Servovalve)
  2. Dr. C. Ramana, Agricultural Engineering College & Research Institute, Tamil Nadu Agricultural University, Coimbatore
    (Investigation on Parameters Affecting the Development of Parasol Sprayer for Orchard)
  3. Dr. G. Sivalingam, Indian Institute of Science, Bangalore
    (Synthesis and Degradation of Biodegradable Polymers)
  4. Dr. Abdul Rahiman Beig B., Indian Institute of Science, Bangalore
    (Application of Three Level Voltage Source Inverters to Voltage Fed and Current Fed High Power Induction Motor Drives)

Master’s Level

  1. Lt Cdr VK Rai, Indian Institute of Technology, Kharagpur
    (Fault Diagnosis and Condition Monitoring of Rolling Element Bearings using Advanced Signal Processing Techniques)
  2. Mr. T.S.R. Ch. Murthy, Indian Institute of Technology, Kanpur
    (Development and Characterization of TiB2 based materials for high temperature applications)
  3. Ms. D. Sirisha, Agricultural Engineering College & Research Institute, Tamil Nadu Agricultural University, Coimbatore
    (Ergonomical evaluation of selected farm equipment for assessing their suitability to women workers)
  4. Ms. Uttama Lahiri, Indian Institute of Technology, Kharagpur
    (Implementation of an Intelligent Relay using DSP Board TMS320F243)
  5. Mr. Pralay Mitra, Bengal Engineering and Science University, West Bengal
    (MAP Assembly Problem)

Bachelor Level

  1. D. Barani Shankar and A. Vino Xavier Raj
    St. Joseph’s College of Engineering, Chennai
    (Design & Implementation of a Hybrid Vehicle using Brushless DC Motor)
  2. Siddhartha Das, Indian Institute of Technology, Kharagpur
    (Modelling of Coupled Momentum, Heat and Solute Transport during DNA Hybridization in a Microchannel in Presence of Electroosmotic Effects and axial Pressure Gradients)
  3. H. Jayaram and M. Vinoth
    Amrita Institute of Technology, Coimbatore
    (Semi-autonomous Surveillance Robot)
  4. Pankaj Pandya and Vikram Singh Yadav
    College of Agricultural Engineering, Jawahar Lal Nehru Krishi Vishwa Vidyalaya (JNKVV), Jabalpur
    (Water Harvesting and Efficient Land Utilization in Satpura Hilly Area (Jabalpur)
  5. Daibashish Gangopadhyyay
    Indian Institute of Technology, Kharagpur
    (Ultra Wide-Band Monolithic CMOS Operational Amplifiers)
  6. Praveen Kumar and Shrikant Kashyap
    Indian Institute of Technology, Roorkee
    (A Fully Automatic Bilingual Question Answering System for E-Learning Documents)
  7. S. Devadurai and J. Maria Alen Dioney Biju
    St. Joseph’s College of Engineering, Chennai
    (Computer Controlled Multifunctional Robot (Bomb Diffuser)
  8. U. Sathyamurthy, S. Raghuveer and V. Venkatesh
    Sri Siva Subramanya Nadar College of Engineering, Chennai
    (Microcontroller Based Protection System for Unmanned Level Crossings)
  9. Kevin Thomas, Ajay Babu Vaddi and Ch. K.V.V.G. Sreeram
    St. Joseph’s College of Engineering, Chennai
    (Remote Control of Battlefield Artillery Units using Optical MMI)

2004

Doctoral Level

  1. Dr. Anupam Singh Ahlawat, Indian Institute of Science, Bangalore
    (Intelligent Optimal Control of Earthquake or Wind Induced Flexural and Torsionally Coupled Vibrations in Buildings)
  2. Dr. Jayan PR, Agricultural Engineering College and Research Institute, Tamil Nadu Agricultural University, Coimbatore
    (Investigation on the effect of Soil, Machine Parameters influencing the Performance of a Dibber Wheel Towards Developing a Dibber Planter)
  3. Dr. NS Mahesh, University Visvesvaraya College of Engineering, (Bangalore University)
    (Some Studies on Spray Casting of Aluminium-Silicon Alloys)
  4. Dr. J Ramkumar, Indian Institute of Technology, Madras
    (Multimode Techniques for Defect Constrained Drilling of GFRP Composites)
  5. Dr. P Thanikaivelan, Faculty of Technology (Anna University), Chennai
    (Approach Towards Zero Discharge Tanning Methods)
  6. Dr. Ushamani M, Cochin University of Science and Technology, Cochin (Kerala)
    (Studies on Photosensitive Polymers for Optical Recording)

Master’s Level

  1. Mr. Arvind Kumar, Indian Institute of Science, Bangalore
    (Numerical Modelling of Transport Phenomena in DC Casting of Non-dendritic Billets)
  2. Mr. Surender Maddela, Indian Institute of Technology, Kanpur
    (Electrodeposition of Ni-WC Composite Coating)
  3. Mr. Pramod Kumar Pandey, Indian Institute of Technology, Kharagpur
    (Simulation of Water Balance Model for Optimum Design of On-farm Reservoir for Rice Fish Integration under Rainfed Ecosystem)
  4. Er. Manpreet Singh, College of Agricultural Engineering, Punjab Agricultural University, Ludhiana (Punjab)
    (Design and Development of Straw Push-Through Assembly for a No-Till Drill)

Bachelor Level

  1. D. Vinod, V Ashok Kumar and V Vijayarangan
    Sri Sai Ram Engineering College, Chennai
    (“INTELLBOT – Intelligent Software Robot Incorporation of Artificial Intelligence)
  2. Mohamed Rafiq M and Srihari Sridharan
    Crescent Engineering College, Chennai
    (Enhancing Network Security Using File Scrambling Techniques : Cryptography & Steganography)
  3. Abu Saad Papa, G Anantha Kumar, P Rajaji and A Shankar
    Madras Institute of Technology, Anna University, Chennai
    (Text Telephony)
  4. Sanjeev Bhalla and Sourabh Saluja
    Indian Institute of Technology, Roorkee
    (Design and VLSI Implementation of an Efficient Cryptographic System)
  5. A Kumar Venkatesh, P Ravi Kumar and G Vignesh Kumar
    Sri Ramakrishna Engineering College, Coimbatore
    (Design and Fabrication of a Semiautomatic Device for Assembling of Air Pressure Horn)

2003

Doctoral Level

  1. Dr. S Kaleemullah, Agricultural Engineering College & Research Institute, Tamil Nadu Agricultural University, Coimbatore
    (Studies on Engineering Properties and Drying Kinetics of Chillies)
  2. Dr. TPD Rajan, Faculty of Engineering & Technology, University of Kerala, Trivandrum
    (Processing and Characterization of Aluminum Metal Matrix Composites)

Master’s Level

  1. Sandhya, College of Agricultural Engineering, Punjab Agricultural University, Ludhiana
    (Modified Atmosphere Storage of Shelled Peas in different Poly-films.)
  2. Vinod Kumar Singh, Indian Institute of Technology, Delhi
    (Design and Development of Micromachined (MEMS) Microstrip Patch Antenna at X- and Ka- Band Frequencies)

Bachelor Level

  1. Shaifally Dawra, Thapar Institute of Engineering and Technology (Deemed University), Patiala (Punjab)
    (Studies on the Effects of Parameters on the Kinetics of Liquid Phase Mercaptan Oxidation using Indigenous Catalyst)
  2. Hamsa Priya, Jayashree B and Swapna Priya G
    Kumaraguru College of Technology, Coimbatore
    (Multiparty Event Scheduler using Mobile Agents)
  3. Guneet Sethi, Indian Institute of Technology, Kanpur
    (Experimental and Theoretical Study of Microwave and Conventional Sintering of Bronze)
  4. Jagrut D Dave, Indian Institute of Technology, Bombay
    (“Parikshak” – A Distance Evaluation System)
  5. Deepak Jain, Indian Institute of Technology, Delhi
    (Pollution-Preventing Lithographic Inks)
  6. P Vijayalakshmi and I Vijayasankar
    Pondicherry Engineering College, Pondicherry
    (Evaluation of Stress Distribution on Dental Structure – Replaced by Fixed Partial Denture)

2002

Doctoral Level

  1. Dr.(Mrs.) HM Bastian
    Institute of Chemical Technology (UDCT), University of Mumbai, Mumbai
    (Reactive Separation Processes)
  2. Dr. I Rajendran
    PSG College of Technology, Coimbatore
    (Studies on Isotropic and Orthotropic Leaf Springs)
  3. Dr. BC Meikap
    Indian Institute of Technology, Kharagpur
    (Abatement of Particulate Laden SO2 in a modified Multi-stage Bubble Column Scrubber)

Master’s Level

  1. Mr. Ranjay Laha
    Indian Institute of Technology, Kharagpur
    (Studies on SiC : Characterization, Metallization and Schottky Junction Formation for H-gas Sensing)
  2. Mr. Ashish Bajpai
    Indian Institute of Technology, Kanpur
    (Deoxidation and Segregation in Continuously Cast Low Carbon Steel Billets)
  3. Mr. TNV Murali Krishna Rao,
    College of Agricultural Engineering, Tamil Nadu Agricultural University, Coimbatore (Tamil Nadu)
    (Design, Development and Evaluation of Cotton Stalk Puller)
  4. Mr. Varinder Singh Saimbhi
    College of Agricultural Engineering, Punjab Agricultural University, Ludhiana (Punjab)
    (Modifications and Development of Rotary Tiller Blade using Computer Graphics)
  5. Ms. Subhashini Ghorai
    Indian Institute of Technology Delhi
    (Fluoride Removal from Drinking Water using Activated Alumina)
  6. Mr. D Devaprakasam,
    Indian Institute of Science, Bangalore
    (Design and Testing of a Surface Force Apparatus)

Bachelor Level

  1. Sanjay B Rupadja, Vivek K Walvekar, Rahul R Deshmukh, T Avinash Rao, Parag B Prabhune, Ms. Priya D Chore, Ms. Pooja B Farkade, Ms. Aarti B Lanjewar
    Government College of Engineering, VMV Post Office, Amravati
    (Design of Microprocessor Based Under Frequency Relay)
  2. Kiran R Aatre, Michael P D’Souza, Gaurav Sen, Neil T George and Sonalkarjetkar
    MS Ramaiah Institute of Technology, Bangalore
    (Stabilization of Air-Borne Systems using Smart Structures)
  3. Mr. L Dayaanandu and J Srihari
    Sri Ramakrishna Engineering College, Vattamalaipalayam, Coimbatore
    (Design and Fabrication of Axle Face Cleaning Special Purpose Machine)
  4. Mr. J Karthikeyan
    Kumaraguru College of Technology, Chinnavedampatty, Coimbatore
    (Effect of Partial Replacement of Cement with Silicafume on Properties of High Performance Concrete)
  5. Mr. S Ravikanth, Santhosha Nayak M, Mr. Prasanna SN and Mr. BN Sandeep
    MS Ramaiah Institute of Technology, Bangalore
    (The Moped Boat)
  6. Ms. Nilima Ghosh, Mr. Pranab Debnath and Mr. Manik Barman
    North Eastern Regional Institute of Science & Technology, Nirjuli
    (Modeling and Simulation of Dissolved Oxygen in Fast Moving Shallow River)
  7. Mr. Johnson Mendonca, Mr. Visesh C Challa and Mr. Guruprasad G
    MS Ramaiah Institute of Technology, Bangalore
    (Analysis and Experimentation of a Supersonic Nozzle for Spray Deposition)
  8. M Ganesh, K Venkatraghavan, M Balaji and J Balakumaran
    AC College of Engineering and Technology, Karaikudi, Sivagangai District, Tamil Nadu
    (FPGA Based Stepper Motor Control)
  9. N Meenakshi, V Ramya, S Angaleswari, C Uma Devi, M Renuga and A Brinda
    AC College of Engineering and Technology, Karaikudi, Sivagangai District, Tamil Nadu
    (Microcontroller Based Robotic Syringe Pump for Cancer Therapy)

2001

Doctoral Level

  1. Mr. B Srinivasa Rao,
    Indian Institute of Science, Bangalore-560012
    (Pressure less Infiltration of Al-Mg based Alloys into Al2O3 Preforms)
  2. Mr. Pranesh Murnal,
    Indian Institute of Technology Bombay, Powai, Mumbai-400076
    (VFPI : An Innovative Device for Aseismic Design)
  3. Dr. Om Vir Singh,
    University of Roorkee, Roorkee-247667 (Uttaranchal)
    (Bioconversion of Agro-Food By-Products to Gluconic Acid By Aspergillus Niger)
  4. Ms. Nisharani A Adhage,
    University Department of Chemical Technology (UDCT), University of Mumbai, Nathalal Parikh Marg, Matunga, Mumbai
    (Cyclodextrin Based Drug Delivery Systems)

Master’s Level

  1. Mr. Rajesh Arya,
    Indian Institute of Science, Bangalore-560012
    (Developmental Studies on a Novel Power Conditioning System for Flash Lamp Pumped Solid State Lasers)
  2. Mr. Amol Arvindrao Kulkarni,
    University Department of Chemical Technology
    (UDCT), University of Mumbai, Nathalal Parikh Marg, Matunga, Mumbai (Design of Multiphase Reactors)

Bachelor Level

  1. Dinakar Ramadurai and Mandeep Singh Oberoi
    Sri Venkateswara College of Engineering, Post Bag No.3, Pennallur, Sriperumbudur, Tamil Nadu-602105
    (Auxiliary Powered Automated Aid for Independent Ambulation)
  2. Antarpreet Singh
    College of Agricultural Engineering, Punjab Agricultural University,Ludhiana-141004 (Punjab)
    (Design and Development of Soil Openers for Reduced Tillage Seed-cum- Fertilizer Drills)
  3. Capt SD Singh, Capt PK Singh, Capt SD Reuben and Capt R Bhandari
    College of Military Engineering, Dapodi, Pune-411031
    (Design & Development of Six Station Hexagonal Turret for CNC Lathe)
  4. Vijay Gupta
    Indian Institute of Technology, Hauz Khas, New Delhi-110016
    (Adaptable Components Using MMIC/MEMS)

2000

Doctoral Level

  1. Dr. Surajit Das,
    Indian Institute of Technology, Kharagpur
    (Studies on Induction, Maturation and Conversion for Enhanced Somatic Embryogenesis in Santalum Album L.)
  2. Dr. AW Patwardhan,,
    Department of Chemical Technology, University of Mumbai, Mumbai.
    (Design of Multiphase Reactors : (i) Development of Dead End Systems, (ii) Modeling of Flow Generated by Impellers and Mixing)
  3. Ms. Dheepa Srinivasan,
    Department of Metallurgy, Indian Institute of Science, Bangalore
    (Phase Evalution, Thermal Stability and Hardness of Melt Spun Nanocrystalline Al-X- Zr.(X=Sc.,Cu, Ni) Alloys)
  4. Dr. Souvik Mahapatra,
    Indian Institute of Technology, Bombay,
    (A comprehensive Study of Hot-Carrier Induced Damage Distributions in MOSFETs Using a Novel Charge Pumping Technique)
  5. Dr. G Narayanan,
    Indian Institute of Science, , Bangalore
    (Synchronised Pulsewidth Modulation Strategies based on Space Vector Approach for Induction Motor Drives)

Master’s Level

  1. Lt. Cdr. B Ajay,
    IN, Institute of Armament Technology, Pune
    (Development of a Laser Torsional Vibrometer)
  2. Mr. Dharmesh Godha,
    Indian Institute of Technology, Kanpur
    (Embedding and XML Engine into an HTTP Server)
  3. Mr. Nilesh Prakash Vichare,
    Department of Chemical Technology, University of Mumbai
    (Studies in Sonochemistry and Cavitation Phenomenon)
  4. Mr. V Balamurugan,
    Department of Applied Mechanics, Indian Institute of Technology, Madras
    (Active Vibration Control of Smart Beams, Plates and Shells using Piezoelectric Materials)
  5. Ms. Jayalaxmi,
    Dept. of Metallurgical and Materials Engineering, Karnataka Regional Engineering College,, Suratkhal
    (High Temperature Low Cycle Fatigue Behaviour of Modified 9 Cr.-1Mo Ferritic Steel)

Bachelor Level

  1. Saptarshi Mondal, Subhankar Mallick, Pulak Bose and Debabrata Mukherjee
    Kalyani Government Engineering College, Kalyani, Nadia
    (Web-based Multi-tiered Heterogeneous Distributed Office Automation and Decision Support System)
  2. Sukanta Das, Sourav Saha, Mrityunjoy Saha and Asif Eqbal
    Kalyani Government Engineering College, Kalyani, Nadia
    (GANANAA : A Bangla Programming Environment)
  3. V Aravind,
    Department of Metallurgical Engineering, Indian Institute of Technology Madras
    (The Effect of Ag2O and TiO2 on the Formation of Functionally Graded Bioactive Ceramics)
  4. Parag Jain, Varun Dev, Yadvinder Singh, Ajay Sharma, Ravdip H Singh, Neeraj Sharma, Bikramjit Sarkaria and Amit Sangwan
    Punjab Engineering College, Chandigarh
    (Mechanism for Shock Free Transfer of a Trauma Patient from a Stretcher Trolley to the Ward Bed)

1999

Doctoral Level

  1. Dr. VM Duraisamy,
    College of Agricultural Engineering, Tamil Nadu Agricultural University, Coimbatore
    (Investigation on the Effect of Soil, Crop, Machine & Operational Parameters in relation to Mechanical Harvesting of Groundnut)
  2. Dr. N Nagendra,
    Department of Metallurgy, Indian Institute of Science, Bangalore
    (Processing Microstructure and Fracture Characteristics of High Volume Fraction Al 2O3 (Al- AlN) Matrix Composites)
  3. Dr. KR Rajagopal,
    Department of Electrical Engineering, Indian Institute of Technology, Delhi
    (Analysis and Design of Hybrid Stepper Motor and Torquer used in Space Application)

Master’s Level

  1. Mr. SG Sanjay,
    Department of Electrical Communication Engineering, Indian Institute of Science, Bangalore
    (TCP over End-to-End ABR : A Study of TCP Performance with End-to-End Rate Control and Stochastic Available Capacity)
  2. Mr. Ganesh Sriram,
    Department of Chemical Engineering, Indian Institute of Technology, Bombay
    (Culture Fluorescence of Xanthomonas Campestris (for Optimal Application of a Novel Oxygen Supply Strategy to Bioreactor)
  3. Mr. Satyabody Kadni,
    Department of Electrical Engineering, Indian Institute of Technology, Delhi
    (Design of DSLODEM : A Multiple HDSL Add – On Card)
  4. Mr. Abhishek Richhariya,
    Department of Mechanical Engineering, Indian Institute of Technology, Delhi
    (Development and Optimization of Electronic Fuel Injection System for Two Stroke S.I. Engine)
  5. Mr. Kandukuri Yagnanna Sastry,
    Department of Metallurgical Engineering, Indian Institute of Technology, Madras
    (Stress Corrosion Cracking of 18%Ni Maraging Steel Weldments in 3.5% NaCl Test Environment)
  6. Mr. V Raman,
    Ocean Engineering Centre, Indian Institute of Technology, Madras
    (Performance of Armoured Caisson Breakwater)
  7. Mr. Santosh Kumar Pandey,
    Department of High Voltage Engineering, Indian Institute of Science, Bangalore
    (Signal Processing Tools to Enhance Interpretation of Impulse Tests on Power Transformers)

Bachelor Level

  1. Vikrant Lal and Shubhashish Datta,
    Indian Institute of Technology, Hauz Khas, New Delhi
    (Topology Design for WDM Networks)
  2. Piyush Gopal Gigras,
    Indian Institute of Technology, Hauz Khas, New Delhi
    (Modelling of Trickle Bed Reactors at Elevated Pressures : Pressure Drop and Liquid Holdup)
  3. Souvik Basu, Vinay Khaitan, Sudipta Ghosh and Satish Jaiswal,
    Kalyani Engineering College, Kalyani
    (Secure Electronic Transaction (SET) Compliant E-Commerce System Design and Implementation)
  4. Rajesh Reang, Mangboi Lhungdim and A Dominic Phungthar,
    Norther Eastern Regional Institute of Science & Technology, Nirjuli, Itanagar, A.P.
    (Experimental Investigation on Cyclone Refrigeration)
  5. G Deepa,
    Indian Institute of Technology, Madras
    (Processing and Characterization of Ferroelectric Ceramics – BaTi03 and PLZT)
  6. Praveen Kumar Paritosh,
    Indian Institute of Technology, Mumbai
    (Qualitative Simulation in Process Engineering)
  7. Anshul Sehgal,
    Indian Institute of Technology, Mumbai
    (Partially Occluded 3D Object Recognition using Bayesian Geometric Hashing and Pose Clustering)
  8. R Balachandar, S Basker, S Ponnezhil Selvan, B Arunkumar and S Durai,
    Arunai Engineering College, Tiruvannamalai
    (Fabrication of a Mini Car using Single Cylinder Petrol Engine)
  9. Rishi Jain,
    Indian Institute of Technology, Kharagpur
    (Design and Fabrication of Intrinsically Safe Liquid Level Transmitter for Hazardous Industries)
  10. Premananda Mohapatra,
    Indian Institute of Technology, Kharagpur
    (Experimental and Theoretical Studies on Cu-Ni-X-Zeolite as Catalysts for Si Engine Emission Control)

Accessibility by WAH